|
|
Post by heathen on Dec 9, 2004 12:00:33 GMT 8
hi , i am about to install a aladdin xt4046 modchip into a v1.6 pal xbox using the header pins, i have all the info i need to rebuild the LCP, but i am unsure if i solder in all of the header pins in, or do some need to be removed? if so, which ones?
Any help appreciated..cheers.
|
|
|
|
Post by Mechaman on Dec 9, 2004 20:38:18 GMT 8
Hi, You can remove the header pins that are not required for the XT4064, ie pins 3,4 and 12 of the LPC header. This will reduce amount of soldering required  Take a look at the LPC pins on the XT 4064 modchip, there are 3 pins that do not require solderpads hope this helps hi , i am about to install a aladdin xt4046 modchip into a v1.6 pal xbox using the header pins, i have all the info i need to rebuild the LCP, but i am unsure if i solder in all of the header pins in, or do some need to be removed? if so, which ones? Any help appreciated..cheers. |
|
|
|
Post by heathen on Dec 10, 2004 10:40:10 GMT 8
Hi mechaman, thanks for that, i was leaning towards removing those pins then i started looking at the hundreds of tutorials pasted all over the net and they all seem to contradict each other...it's good to get some info from someone who knows what they are on about...cheers.
|
|
|
|
Post by heathen on Dec 11, 2004 11:44:00 GMT 8
Back again, The modchip ic now installed and appears to be running, the LED on the front of the xbox changes to be appropreate colour when pressed, ie..button pressed quickly, LED is green and normal xbox dash loads up....when button is pressed for 1 second, LED turns amber and an green xbox symbol appears on the screen with an EVOX symbol in the top left corner....then it loads up the normal xbox dash......shouldn't it come up with an EVOX screen??
or am i on the wrong track...
|
|
|
|
Post by Mechaman on Dec 11, 2004 22:33:28 GMT 8
Not really, you're almost done The modchip is functioning properly now. U can insert a backup disc in and it should boot up Evox and other apps can be installed by downloading Slayer's 2.6 from www.xbins.orgDownload the iso, burn it into a CDRW disk and boot it up on your Xbox set. Follow the instructions that came with the download and your're good to go hope this helps Back again, The modchip ic now installed and appears to be running, the LED on the front of the xbox changes to be appropreate colour when pressed, ie..button pressed quickly, LED is green and normal xbox dash loads up....when button is pressed for 1 second, LED turns amber and an green xbox symbol appears on the screen with an EVOX symbol in the top left corner....then it loads up the normal xbox dash......shouldn't it come up with an EVOX screen?? or am i on the wrong track... |
|
